Simes S.6615/6BC.14 Microloft sof 1w accent led 6 ip65 ww

TYPE
Downlight. IP 65 protection rating.

MATERIAL CHARACTERISTICS
Die-cast aluminum structure EN AB-47100 with low copper content and high resistance to oxidation. Tumbled finish for preparation for the painting phase. Screws in A4 stainless steel with a high molybdenum content of 2.5-3%. Gaskets in  annealed silicone.
Extra-resistant double painting carried out in 3 phases:
1) BONDERITE treatment with a metal-free fluorozirconic chemical protection material containing ceramic nanoparticles that create a cohesive, inorganic, high-density layer. 2) PRE-POLYMERIZATION cycle with application of an epoxy primer with characteristics that allow the device to be overpainted and with high resistance to oxidation thanks to the presence of zinc. 3) POLYMERIZATION cycle with the application of polyester powder with high resistance to UV rays and atmospheric agents, with resistance to the salt spray test for 1200 hours. Mechanical resistance IK 06

LIGHTING PERFORMANCE
Clear tempered protective glass. Light source with fixed lamp position. Efficiency --

INSTALLATION AND MAINTENANCE
Pre-wired base and disconnect switch make installation and maintenance operations easier and safer.

WIRING
5m of H05RN-F type power cable.
Insulation class: CLASS II
Available colors: White (code 01), Aluminum gray (code 14), Anthracite gray (code 24) Weight: 0.9197 Kg Glow Wire test: --
Fixtures supplied complete with LED module

LOFT REGISTERED MODEL

This device features integrated LED modules. In case of damage or malfunction, contact the manufacturer for additional instructions on how to replace the LED module and related components. The LED module in this device cannot be handled by the end user (EU Regulation 874/2012).

This product contains a light source of energy efficiency class: E.

LED module designed in accordance with the current Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21), where the light quality is reliable for a lifetime of 70,000 hours referred to L80 B10 Ta 25°C (50,000 hours referred to L80 B10 Ta 40°C). Luminaire lifespan min. 50,000 hours Ta 40°C. Performance ambient temperature Tq 25°C. Operating ambient temperature from -20°C to +50°C. Storage temperature from -20°C to +60°C.

ELECTRONIC EQUIPMENT SENSITIVE TO OVERVOLTAGE.
It is recommended to install surge protection devices (SPDs) in the electrical system. These devices prevent the intensity of these phenomena, protecting the fixtures from damage and prolonging their life. Outdoor lighting fixtures are subject to all types of permanent, temporary, or transient electrical disturbances. These disturbances can cause permanent damage or failures that compromise their performance and lifespan. Surge protection devices (supplied by SIMES) are used to limit the destructive effect of these phenomena. A surge protection device must be installed for each lighting fixture no more than 10 meters away. To ensure proper coordination of the protection devices, a surge protection device must also be included within the system's electrical power panel.