Talia H 360 Double Emission

Designed by FLOS Outdoor

Bollard light. Configuration: Extruded aluminum structure. Polycarbonate diffuser: UV-stabilized opal. Double-layer painting for high corrosion resistance: the aluminum components are painted with a double coat using powders compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminum fitting starts from components that have been sandblasted to make the surface more porous and increase the adhesion of the paint. Ares effects alkaline and acid washing to completely clean the surfaces, then rinses with demineralized water to remove any residual particles, subsequently a chemical conversion treatment is carried out to protect against rust. Protection rating: IP65 Compliant with EN 60598-1 Class of insulation: II Installation: The LED module is housed in a sealed transparent polycarbonate cylinder with a compensation valve. The device comes with a cable and a wiring kit with crimp connectors and adhesive heat-shrink tubing for a watertight electrical connection. Installation on a concrete base or surface is recommended, either directly with anchors or using the appropriate mounting plate (ordered separately). Outdoor use requires suitable flexible cables. We recommend using a connection system with a protection rating greater than or equal to the device's protection rating. When installing and maintaining fixtures, it is important to exercise caution and avoid damaging the paintwork. Damage to the coating when exposed to external conditions or water could cause corrosion. Chemicals affect the coating's anti-corrosion protection.