Simes S.3326.14 Jet 1 X HIT-CRI 70W G12 grey

S.3326

JET

-TYPE

Floor installation table.

IP 65 protection rating

-CHARACTERISTICS OF THE MATERIALS

Body in extruded EN AW-6060 and die-cast EN primary aluminium

AB-47100 with high resistance to oxidation.

Tumbling process to prepare for the painting phase.

A4 stainless steel screws with a high molybdenum content of 2.5-3%.

Silicone ricotta gaskets.

Extra-resistant painting carried out in 3 phases:

1) BONDERITE treatment with chemical protection of the material

metal-free fluozirconium containing ceramic nanoparticles that

create a cohesive, inorganic, high density layer.

2) PRE-POLYMERISATION cycle with primer application

epoxy with characteristics of overpainting on the appliance and of

high resistance to oxidation thanks to the presence of zinc.

3) POLYMERIZATION cycle with the application of polyester powder

bonded with high resistance to UV rays and agents

atmospheric, with resistance to the salt spray test of 1500h.

Mechanical resistance of glass IK 10

-LIGHTING PERFORMANCE

Reflectors in 99.98% pure aluminium.

Transparent tempered protective glass 8 mm thick.

Light source, with fixed lamp position.

Yield --

-INSTALLATION AND MAINTENANCE

The upper grille acts as an anti-glare screen. Under the grill it is

fix a UV stabilized polycarbonate disc that prevents

the entry of objects into the compartment below. The 14° in. medium beam reflector

supplied is adjustable and can also be, upon request, with a narrow beam

from 8°.

Between the upper grille and the cylindrical body that contains the reflector are

3 drains have been created to allow the water to flow out, preventing it from flowing

dirty deposits on the speaker.

-WIRING

Double power cable entry with PG16 cable glands.

Insulation class CLASS I

Available colors ALUMINUM GRAY (cod.14), ANTHRACITE GREY

(code 24)

Weight 8.26 kg

Glow wire test 850°C

Lamps supplied only on request.