Simes s 5458 plano recessed 35w g53 glass with light

S.5458

FLOOR

-TYPE

The appearance is heat resistant for ground installation.

Depth up to 100 mm.

Degree of protection IP 67

-MATERIAL CHARACTERISTICS

Body in die-cast primary aluminium “Copper Free” EN AB-44100

with high resistance to oxidation.

Preparation of the burr for preparation during the painting phase.

A4 stainless steel screws have a high molybdenum content of 2.5-3%.

Silicone ricotta gaskets.

Extra resistant paint made in 3 steps:

1) BONDERITE treatment with chemical protection of materials

Fluorozirconic deprived of metal content of ceramic nanoparticles he that

create a cohesive, inorganic, high-density layer.

2) PREPOLYMERIZED cycle with application from the bottom

possible with reliability features of all devices and

Increase the resistance to the possible resistance due to the pressure of the zinc.

3) POLYMERIZATION cycle with application of polyester powder

Glued with high resistance characteristics with UV protection agent

atmospheric, with resistance to salt temperature test of 1500h.

Mechanical resistance of glass IK 09

Maximum load 1000 kg

-LIGHTING PERFORMANCE

Semi-acid protection glass at a temperature of 8 mm, sodium type

Weissglass calcium with a high transmittance value of +12% (compared to a

common glass).

High brightness, with ±15° tiltable lamp position.

Yield 56%

-LOW SURFACE TEMPERATURE

Weissglass glass is able to absorb less energy than glass

traditional thanks to the high transmittance.

Glass temperature 125°C (Ta 25°C)

Electronic power supply with less heat.

Allows for the optimization of the layout of the product's internal components

heat dissipation at internal temperature inside

admissible limits.

-FORMWORK FOR INSTALLATION AND MAINTENANCE

Polypropylene formwork with external edge in AISI 316L stainless steel

prepared for 4 days to enter the cavity to allow:

1) provides simple wiring;

2) connect it quickly;

3) Easily remove the device from the device for handling.

-WIRING

The power supply area uses H07RN-F type cable

pressure PG 13.5 (Ø 6÷12 mm), printed with epoxy resin

two-component and internal hollow with bounced Guinea caviar

silicone protective glass sock.

Provide M20 quick connector (Ø 5÷14 mm) for

Single passerine connection, to be housed inside the formwork.

Replace the headlamp to completely turn off the device.

Insulation class CLASS II

With 230V-12V electronic transformer in IP67 box.

Finish: ALL GLASS

Weight 2.86kg

Glow wire test --

Appliance supplied with lamps

S.5458 ACCESSORIES FOR PLANO S.5503 QUICK CONNECTOR M20 quick connector (Ø 5÷13 mm) IP68 for single pass-through connection. To be housed inside the formwork.